Promotions ENDURO BEARINGS Bearing Abec 3 – LLU MAX 1 piece

Bearing sold individually.

Grade 10 Chromium Steel Balls:
High precision balls are within 10/1,000,000″ round, twice as round as the industry standard, at it’s highest level.
 
52100 High Carbon Chromium Alloy Races:
Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-3 precision and noiseless movement.

Riveted Steel Retainer for toughness, ABEC-3 tolerances and noise tested, C-3 or C-N Internal Clearance.The Enduro bearings have several ABEC 3 level precision :
 

• “2RS” generic for 2 Rubber Seals one on each side
• “LLB” is a double-lip type seal making light contact, and also rides in a groove making a labyrinth seal
• “LLU” is a double-lip type seal making medium contact, and also rides in a groove making a labyrinth seal
• “MAX” Type bearings have no retainer and a fill slot for balls “MAX” stands for Maximum Balls They have in general 35% moreload capacity than retainer bearings. This bearings do not spin as smoothly as the retainer bearings and should in general be used for suspension pivots or problem areas where standard bearings wear out prematurely.

Correspondence and use :

• 688 : 8x16x5mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 698 : 8x19x6mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket) 
• 6800 : 10x19x5mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6900 : 10x22x6mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6000 : 10x26x8mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6801 : 12x21x5mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6901 : 12x24x4mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6001 : 12x28x8mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6802 : 15x24x5mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6902 : 15x28x7mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6803 : 17x26x5mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6903 : 17x30x7mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6804 : 20x32x7mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6805 : 25x37x7mm (All uses, recommended for use as a strong constraint on suspension arms or bottom bracket)
• 6806 : 30x42x7mm (All uses, recommended for use as a strong constraint on suspension arms or BB30 Classic bottom bracket)

MORE INFORMATION

Features